LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Corolla L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 71 (Engine Cooling System (M20A-FKS) - Service Information) >> THERMOSTAT (w/ Cooling Fan ECU) >> Removal [09/2022 - ] >> Procedure

Removal [09/2022 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE ENGINE WATER PUMP ASSEMBLY (WATER INLET HOUSING) 

    Refer to REMOVAL [09/2022 - ] 

  2. REMOVE WATER INLET WITH THERMOSTAT SUB-ASSEMBLY 
    1. Using an 8 mm socket wrench, remove the 2 bolts and water inlet with thermostat sub-assembly.
      GTY1103303Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the gasket from the water inlet with thermostat sub-assembly.
      GTY1103301Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals