DTC P1A80-00: Hybrid/EV Battery Stack 1 Delta SOC High; DTC P1AD0-1B: Hybrid/EV Battery Block Circuit Resistance Above Threshold [01/2019 - 09/2022]: Procedure

1. Connect the Techstream to the DLC3.
2. Turn the power switch on (IG).
3. Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.
4. Check and record any HV system DTCs and freeze frame data.

   Powertrain > Hybrid Control > Trouble Codes 

   Result

   Result	Proceed to
   P0AFC-00, P0AFC-96, P308A-12 or P0AFC-62 is output	A
   Other than above (w/o Canister Pump Module)	B
   Other than above (w/ Canister Pump Module)	C

5. Turn the power switch off.

Result: 

A 

GO TO DTC CHART (HYBRID CONTROL SYSTEM) 

Refer to DIAGNOSTIC TROUBLE CODE CHART [01/2019 - 04/2020] , or refer to DIAGNOSTIC TROUBLE CODE CHART [04/2020 - 09/2022]

Result: 

B 

See step  3

Result: 

C 

See step  2

1. Connect the Techstream to the DLC3.
2. Turn the power switch on (IG).
3. Read the value of freeze frame data item "Number of Hybrid/EV Battery Current Sensor Characteristics Determination" for DTC P1A80-00 or P1AD0-1B.

   Powertrain > Hybrid Control 

   Tester Display
   Number of Hybrid/EV Battery Current Sensor Characteristics Determination

   Result

   Result	Proceed to
   0 to 99	A
   Other than above	B

4. Turn the power switch off.

Result: 

B 

REPLACE HYBRID BATTERY TERMINAL BLOCK 

Refer to REMOVAL [01/2019 - 09/2022]

Result: 

A 

See step  3

1. Read the odometer to check the total distance the vehicle has been driven.

   Result

   Result		Proceed to
   Total distance driven is less than 200000 km (124280 mile)		A
   Total distance driven is 200000 km (124280 mile) or more	Current total distance driven - total distance driven when hybrid battery terminal block replaced = less than 200000 km (124280 mile) *1
   	Other than above	B

   HINT: 

   *1: If the hybrid battery terminal block has been replaced, use the total distance driven since it was replaced.

Result: 

A 

REPLACE HV BATTERY 

Refer to REMOVAL [01/2019 - 09/2022]

Result: 

B 

See step  4

Refer to REMOVAL [01/2019 - 09/2022]

Result

Result: 

NEXT 

REPLACE HYBRID BATTERY TERMINAL BLOCK 

Refer to REMOVAL [01/2019 - 09/2022]