DTC P0620-49: Generator Control Circuit Internal Electronic Failure [09/2024 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.

CHARGING CIRCUIT WITHOUT LOAD
See step 6

Result

Result

OK

NG

Result:

NG

REPAIR OR REPLACE GENERATOR ASSEMBLY

for Denso Made Generator: Refer to REMOVAL [03/2023 - ]

for VALEO Made: Refer to REMOVAL [11/2022 - ]

Result:

OK

See step 2
CHARGING CIRCUIT WITH LOAD
See step 8

Result

Result

OK

NG

Result:

OK

CHECK FOR INTERMITTENT PROBLEMS

Refer to CHECK FOR INTERMITTENT PROBLEMS [06/2018 - ]

Result:

NG

REPAIR OR REPLACE GENERATOR ASSEMBLY

for Denso Made Generator: Refer to REMOVAL [03/2023 - ]

for VALEO Made: Refer to REMOVAL [11/2022 - ]