LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Corolla L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 34 (Manual Transaxle System (EG60) - Service Information (1 Of 3)) >> Neutral Position Switch >> Removal [06/2018 - 01/2019] >> Procedure

Removal [06/2018 - 01/2019]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE RADIATOR SUPPORT OPENING COVER 

    Refer to PROCEDURE - Step 1

  2. REMOVE INLET NO. 1 AIR CLEANER 

    Refer to PROCEDURE - Step 5

  3. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE 

    Refer to PROCEDURE - Step 2

  4. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 2

  5. REMOVE AIR CLEANER CASE SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 7

  6. REMOVE NEUTRAL POSITION SWITCH 
    1. Disconnect the neutral position switch connector.
      GTY869894Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Using SST, remove the neutral position switch and gasket from the manual transmission case.
      • SST: 09816-30010 
      GTY935447Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals