LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Corolla L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 34 (Manual Transaxle System (EG60) - Service Information (1 Of 3)) >> Back-Up Light Switch >> Removal [06/2018 - 11/2022] >> Procedure

Removal [06/2018 - 11/2022]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE BACK-UP LIGHT SWITCH ASSEMBLY 
    1. Disconnect the back-up light switch assembly connector.
      GTY869998Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Using a 27 mm deep socket wrench, remove the back-up light switch assembly and gasket from the manual transmission case.
      GTY869999Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals