LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Corolla L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 33 (M/T Clutch - Service Information) >> Clutch Pedal Switch >> On-Vehicle Inspection [01/2019 - ] >> Procedure

On-Vehicle Inspection [01/2019 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. INSPECT CLUTCH START SYSTEM 
    1. Check that the engine does not start when the clutch pedal sub-assembly is released.
    2. Check that the engine starts when the clutch pedal sub-assembly is fully depressed.

      If necessary, inspect and replace the clutch start switch assembly.

scientia non olet · About LEMON Manuals