Removal [06/2018 - ]: Procedure
WARNING: This page is about a different variant/trim than selected.
- REMOVE BRAKE BOOSTER ASSEMBLY
Refer to REMOVAL [06/2018 - 01/2019]
, or refer to REMOVAL [01/2019 - 09/2022]
, or refer to REMOVAL [09/2022 - ]
- DISCONNECT CLUTCH MASTER CYLINDER TO FLEXIBLE HOSE TUBE
- Using a 10 mm union nut wrench, disconnect the clutch master cylinder to flexible hose tube from the clutch master cylinder assembly.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
HINT:
Use a container to collect the fluid.
- DISCONNECT NO. 1 CLUTCH RESERVOIR HOSE
- Slide the hose clip and disconnect the No. 1 clutch reservoir hose from the clutch master cylinder assembly.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
HINT:
Use a container to collect the fluid.
- DISCONNECT CLUTCH MASTER CYLINDER ASSEMBLY
See step 2 [06/2018 - 01/2019], or See step 2 [01/2019 - 03/2019], or See step 2 [03/2019 - 09/2022], or See step 3 [09/2022 - 11/2022], or See step 3 [11/2022 - ]
- REMOVE CLUTCH MASTER CYLINDER ASSEMBLY
- Remove the 2 nuts and clutch master cylinder assembly from the vehicle body.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Remove the clutch master cylinder gasket from the clutch master cylinder assembly.