DTC P0335-31: Crankshaft Position Sensor "A" No Signal [09/2022 - 11/2022]: Description
WARNING: This page is about a different variant/trim than selected.
The TCM receives the engine speed signal from the ECM via CAN communication and direct line.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Memory | Note |
|---|---|---|---|---|---|---|
| P0335-31 | Crankshaft Position Sensor "A" No Signal | When the engine speed signal received from the ECM via CAN communication is 500 rpm or more, the signal received via direct line is 0 rpm for 5 seconds or more (1 trip detection logic). |
|
Comes on | DTC stored | SAE Code: P0335 |