On-Vehicle Inspection [06/2018 - ]: Procedure
WARNING: This page is about a different variant/trim than selected.
- INSPECT PCV VALVE (VENTILATION VALVE SUB-ASSEMBLY)
Check the PCV valve (ventilation valve sub-assembly) operation.
- Start the engine.
- Slide the clip and disconnect the No. 2 ventilation hose from the cylinder head cover sub-assembly.
- Check that air is sucked into the cylinder head cover sub-assembly.
Standard
Air is sucked into the cylinder head cover sub-assembly.
If the result is not as specified, replace the PCV valve (ventilation valve sub-assembly).