Removal [11/2022 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.

REMOVE FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY
- for Double Wishbone Type Suspension:
  Refer to REMOVAL [11/2022 - ]
- for Torsion Beam Type Suspension:
  Refer to REMOVAL [11/2022 - ]
REMOVE FUEL PUMP
- for Double Wishbone Type Suspension:
  Refer to DISASSEMBLY [11/2022 - ]
- for Torsion Beam Type Suspension:
  Refer to DISASSEMBLY [11/2022 - ]
REMOVE FUEL PRESSURE REGULATOR HOLDER
- for Double Wishbone Type Suspension:
  Refer to PROCEDURE - Step 2
- for Torsion Beam Type Suspension:
  Refer to PROCEDURE - Step 2
REMOVE FUEL MAIN VALVE ASSEMBLY
- for Double Wishbone Type Suspension:
  Refer to PROCEDURE - Step 3
- for Torsion Beam Type Suspension:
  Refer to PROCEDURE - Step 3