Caution / Notice / Hint
WARNING: This page is about a different variant/trim than selected.
NOTE:
- Perform registration and/or initialization when parts related to the continuously variable transaxle system are replaced.
Refer to PRECAUTION [01/2019 - 09/2022] , or refer to PRECAUTION [09/2022 - 11/2022]
- Check that no DTCs are stored after performing initialization.
Refer to DTC CHECK / CLEAR [06/2018 - 09/2022] , or refer to DTC CHECK / CLEAR [09/2022 - 11/2022]
- Inspect the fuses for circuits related to this system before performing the following procedure.
HINT:
Read freeze frame data using the Techstream. The TCM records vehicle and driving condition information as freeze frame data the moment a DTC is stored. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, if the air fuel ratio was lean or rich, and other data from the time the malfunction occurred.