| C1352 |
Increasing Pressure Solenoid (FR) |
11
1100
1101
1102
1103
1170 |
- INF Code: 11
- A malfunction in the solenoid current monitoring circuit is detected for 0.05 seconds or more.
- INF Code: 1100
- An open is detected in the solenoid for 0.05 seconds or more.
- INF Code: 1101
- Overcurrent is detected in the solenoid for 0.05 seconds or more.
- INF Code: 1102
- Current leakage is detected in the solenoid for 0.05 seconds or more.
- INF Code: 1103
- A solenoid drive circuit malfunction (flyback diode malfunction) is detected for 0.05 seconds or more.
- INF Code: 1170
- The ECU solenoid output differs from the drain monitoring output (drain monitoring is on when the ECU solenoid is not operating) for 0.05 seconds or more.
|
- Wire harness or connector
- Brake actuator assembly
- Skid control ECU (brake booster with master cylinder assembly)
|
Comes on |
- INF Code 11: SAE Code C12BC (Case 2)
- INF Code 1100: SAE Code C12BD
- INF Code 1101: SAE Code C12BE (Case 1)
- INF Code 1102: SAE Code C12BE (Case 2)
- INF Code 1103: SAE Code C12BC (Case 1)
- INF Code 1170: SAE Code C12BE (Case 3)
- Electronically controlled brake system DTC
|
| C1353 |
Increasing Pressure Solenoid (FL) |
13
1106
1107
1108
1109
1172 |
- INF Code: 13
- A malfunction in the solenoid current monitoring circuit is detected for 0.05 seconds or more.
- INF Code: 1106
- An open is detected in the solenoid for 0.05 seconds or more.
- INF Code: 1107
- Overcurrent is detected in the solenoid for 0.05 seconds or more.
- INF Code: 1108
- Current leakage is detected in the solenoid for 0.05 seconds or more.
- INF Code: 1109
- A solenoid drive circuit malfunction (flyback diode malfunction) is detected for 0.05 seconds or more.
- INF Code: 1172
- The ECU solenoid output differs from the drain monitoring output (drain monitoring is on when the ECU solenoid is not operating) for 0.05 seconds or more.
|
- Wire harness or connector
- Brake actuator assembly
- Skid control ECU (brake booster with master cylinder assembly)
|
Comes on |
- INF Code 13: SAE Code C12A6 (Case 2)
- INF Code 1106: SAE Code C12A7
- INF Code 1107: SAE Code C12A8 (Case 1)
- INF Code 1108: SAE Code C12A8 (Case 2)
- INF Code 1109: SAE Code C12A6 (Case 1)
- INF Code 1172: SAE Code C12A8 (Case 3)
- Electronically controlled brake system DTC
|
| C1354 |
Increasing Pressure Solenoid (RR) |
15
1112
1113
1114
1115
1174 |
- INF Code: 15
- A malfunction in the solenoid current monitoring circuit is detected for 0.05 seconds or more.
- INF Code: 1112
- An open is detected in the solenoid for 0.05 seconds or more.
- INF Code: 1113
- Overcurrent is detected in the solenoid for 0.05 seconds or more.
- INF Code: 1114
- Current leakage is detected in the solenoid for 0.05 seconds or more.
- INF Code: 1115
- A solenoid drive circuit malfunction (flyback diode malfunction) is detected for 0.05 seconds or more.
- INF Code: 1174
- The ECU solenoid output differs from the drain monitoring output (drain monitoring is on when the ECU solenoid is not operating) for 0.05 seconds or more.
|
- Wire harness or connector
- Brake actuator assembly
- Skid control ECU (brake booster with master cylinder assembly)
|
Comes on |
- INF Code 15: SAE Code C12E8 (Case 2)
- INF Code 1112: SAE Code C12E9
- INF Code 1113: SAE Code C12EA (Case 1)
- INF Code 1114: SAE Code C12EA (Case 2)
- INF Code 1115: SAE Code C12E8 (Case 1)
- INF Code 1174: SAE Code C12EA (Case 3)
- Electronically controlled brake system DTC
|
| C1355 |
Increasing Pressure Solenoid (RL) |
17
1118
1119
1120
1121
1176 |
- INF Code: 17
- A malfunction in the solenoid current monitoring circuit is detected for 0.05 seconds or more.
- INF Code: 1118
- An open is detected in the solenoid for 0.05 seconds or more.
- INF Code: 1119
- Overcurrent is detected in the solenoid for 0.05 seconds or more.
- INF Code: 1120
- Current leakage is detected in the solenoid for 0.05 seconds or more.
- INF Code: 1121
- A solenoid drive circuit malfunction (flyback diode malfunction) is detected for 0.05 seconds or more.
- INF Code: 1176
- The ECU solenoid output differs from the drain monitoring output (drain monitoring is on when the ECU solenoid is not operating) for 0.05 seconds or more.
|
- Wire harness or connector
- Brake actuator assembly
- Skid control ECU (brake booster with master cylinder assembly)
|
Comes on |
- INF Code 17: SAE Code C12D2 (Case 2)
- INF Code 1118: SAE Code C12D3
- INF Code 1119: SAE Code C12D4 (Case 1)
- INF Code 1120: SAE Code C12D4 (Case 2)
- INF Code 1121: SAE Code C12D2 (Case 1)
- INF Code 1176: SAE Code C12D4 (Case 3)
- Electronically controlled brake system DTC
|
| C1356 |
Decreasing Pressure Solenoid (FR) |
12
1104
1105
1171 |
- INF Code: 12
- An open is detected in the solenoid for 0.05 seconds or more.
- INF Code: 1104
- Overcurrent is detected in the solenoid for 0.05 seconds or more.
- INF Code: 1105
- Current leakage is detected in the solenoid for 0.05 seconds or more.
- INF Code: 1171
- The ECU solenoid output differs from the drain monitoring output (drain monitoring is on when the ECU solenoid is not operating) for 0.05 seconds or more.
|
- Wire harness or connector
- Brake actuator assembly
- Skid control ECU (brake booster with master cylinder assembly)
|
Comes on |
- INF Code 12: SAE Code C12C8
- INF Code 1104: SAE Code C12C9 (Case 1)
- INF Code 1105: SAE Code C12C9 (Case 2)
- INF Code 1171: SAE Code C12C9 (Case 3)
- Electronically controlled brake system DTC
|
| C1357 |
Decreasing Pressure Solenoid (FL) |
14
1110
1111
1173 |
- INF Code: 14
- An open is detected in the solenoid for 0.05 seconds or more.
- INF Code: 1110
- Overcurrent is detected in the solenoid for 0.05 seconds or more.
- INF Code: 1111
- Current leakage is detected in the solenoid for 0.05 seconds or more.
- INF Code: 1173
- The ECU solenoid output differs from the drain monitoring output (drain monitoring is on when the ECU solenoid is not operating) for 0.05 seconds or more.
|
- Wire harness or connector
- Brake actuator assembly
- Skid control ECU (brake booster with master cylinder assembly)
|
Comes on |
- INF Code 14: SAE Code C12B2
- INF Code 1110: SAE Code C12B3 (Case 1)
- INF Code 1111: SAE Code C12B3 (Case 2)
- INF Code 1173: SAE Code C12B3 (Case 3)
- Electronically controlled brake system DTC
|
| C1358 |
Decreasing Pressure Solenoid (RR) |
16
1116
1117
1175 |
- INF Code: 16
- An open is detected in the solenoid for 0.05 seconds or more.
- INF Code: 1116
- Overcurrent is detected in the solenoid for 0.05 seconds or more.
- INF Code: 1117
- Current leakage is detected in the solenoid for 0.05 seconds or more.
- INF Code: 1175
- The ECU solenoid output differs from the drain monitoring output (drain monitoring is on when the ECU solenoid is not operating) for 0.05 seconds or more.
|
- Wire harness or connector
- Brake actuator assembly
- Skid control ECU (brake booster with master cylinder assembly)
|
Comes on |
- INF Code 16: SAE Code C12F4
- INF Code 1116: SAE Code C12F5 (Case 1)
- INF Code 1117: SAE Code C12F5 (Case 2)
- INF Code 1175: SAE Code C12F5 (Case 3)
- Electronically controlled brake system DTC
|
| C1359 |
Decreasing Pressure Solenoid (RL) |
18
1122
1123
1177 |
- INF Code: 18
- An open is detected in the solenoid for 0.05 seconds or more.
- INF Code: 1122
- Overcurrent is detected in the solenoid for 0.05 seconds or more.
- INF Code: 1123
- Current leakage is detected in the solenoid for 0.05 seconds or more.
- INF Code: 1177
- The ECU solenoid output differs from the drain monitoring output (drain monitoring is on when the ECU solenoid is not operating) for 0.05 seconds or more.
|
- Wire harness or connector
- Brake actuator assembly
- Skid control ECU (brake booster with master cylinder assembly)
|
Comes on |
- INF Code 18: SAE Code C12DE
- INF Code 1122: SAE Code C12DF (Case 1)
- INF Code 1123: SAE Code C12DF (Case 2)
- INF Code 1177: SAE Code C12DF (Case 3)
- Electronically controlled brake system DTC
|