DTC P1362-01: "B" Camshaft Position Actuator Bank 1 General Electrical Failure [03/2019 - 09/2022]: Description

WARNING: This page is about a different variant/trim than selected.

Refer to DTC P0010-01.

Refer to DESCRIPTION

DTC No.	Detection Item	DTC Detection Condition	Trouble Area	MIL	Memory	Note
P1362-01	"B" Camshaft Position Actuator Bank 1 General Electrical Failure	While engine is running, malfunction in rotation direction signal (VTD) of cam timing control motor with EDU assembly is detected for 3 seconds (1 trip detection logic).	Cam timing control motor with EDU assembly Open or short in cam timing control motor with EDU assembly circuit VVT relay ECM	Comes on	DTC stored	SAE Code: P1362 DTC for Mexico Models: Applies

SYMPTOMS AND FAIL-SAFE OPERATION DURING CAM TIMING CONTROL MOTOR MALFUNCTION

Vehicle Condition	Fail-Safe
Engine difficult to start Lack of power	The cam timing control motor with EDU assembly is operated to the most retarded position.