DTC P0715-31: Input/Turbine Speed Sensor "A" No Signal [03/2019 - 11/2022]: Description

WARNING: This page is about a different variant/trim than selected.

Refer to DTC P0715-12.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area	MIL	Memory	Note
P0715-31	Input/Turbine Speed Sensor "A" No Signal	When the conditions (a) and (b) are both met, the value of the transmission revolution sensor is 300 rpm or less for 3 seconds or more (2 trip detection logic): (a) The vehicle speed is 32 km/h (20 mph) or more. (b) Fuel cut in progress.	Transmission revolution sensor Input shaft ECM	Comes on	DTC stored	SAE Code: P0717 DTC for Mexico Models: Does not apply

Reference: Inspection using an oscilloscope.
Refer to DESCRIPTION [03/2019 - 06/2021] , or refer to DESCRIPTION [06/2021 - 11/2022]