DTC P0606-94: Control Module Processor Unexpected Operation [09/2022 - 11/2022]: Description
WARNING: This page is about a different variant/trim than selected.
The ECM calculates and compares the accelerator pedal opening angle value used for control and the value used for monitoring.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Memory | Note |
|---|---|---|---|---|---|---|
| P0606-94 | Control Module Processor Unexpected Operation | Condition where output of the accelerator opening angle value used for control is more excessive than that of the accelerator opening angle value used for monitoring is continuously detected for 0.2 seconds or more (1 trip detection logic). |
|
Comes on | DTC stored |
|