DTC P0606-09: Control Module Processor (Brake Override System Output Signal) Component Failure [03/2023 - ]: Description
WARNING: This page is about a different variant/trim than selected.
The ECM calculates and compares the accelerator opening angle command value used for control and the value used for monitoring, after corrected by the brake override system.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Memory | Note |
|---|---|---|---|---|---|---|
| P0606-09 | Control Module Processor (Brake Override System Output Signal) Component Failure | Output of the accelerator opening command value after corrected by the brake override system used for control is more excessive than that of the accelerator opening angle command value after corrected by the brake override system repairs used for monitoring (1 trip detection logic). | ECM | Comes on | DTC stored |
|