DTC P0365-31: Camshaft Position Sensor "B" Bank 1 No Signal [09/2024 - ]: Description

WARNING: This page is about a different variant/trim than selected.

Refer to DTC P0365-11.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area	MIL	Memory	Note
P0365-31	Camshaft Position Sensor "B" Bank 1 No Signal	Diagnosis condition: The engine is running (600 rpm or more). Abnormal condition: No camshaft position sensor (for exhaust camshaft) signal. Malfunction time: 5 seconds or more Trip logic: 1 trip detection logic Detection conditions: Continuous Sensors/components used for detection (Main): Camshaft position sensor (for exhaust camshaft) Sensors/components used for detection (Related): Crankshaft position sensor	Open or short in camshaft position sensor (for exhaust camshaft) circuit Camshaft position sensor (for exhaust camshaft) ECM	Comes on	DTC stored	SAE Code: P0365 DTC for Mexico Models: Applies

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

MIL

Memory

Note

P0365-31

Camshaft Position Sensor "B" Bank 1 No Signal

Diagnosis condition:

Abnormal condition:

Malfunction time:

Trip logic:

Detection conditions:

Sensors/components used for detection (Main):

Sensors/components used for detection (Related):

Comes on

DTC stored

Reference: Inspection using an oscilloscope.