LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Corolla L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 142 (Engine Starting System (M20A-FKS) - Service Information) >> Ignition Switch >> Removal [01/2019 - ] >> Procedure

Removal [01/2019 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE LOWER STEERING COLUMN COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 5 [01/2019 - 03/2019] , or refer to PROCEDURE - Step 5 [03/2019 - 09/2019] , or refer to PROCEDURE - Step 5 [09/2019 - 04/2020] , or refer to PROCEDURE - Step 5 [04/2020 - 09/2022] , or refer to PROCEDURE - Step 5 [09/2022 - 11/2022] , or refer to PROCEDURE - Step 5 [11/2022 - ]

  2. REMOVE IGNITION OR STARTER SWITCH ASSEMBLY 
    1. Disconnect ignition or starter switch assembly connector.
      GTY932884Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the 2 claws and remove the ignition or starter switch assembly from the upper steering column bracket assembly.
scientia non olet · About LEMON Manuals