LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Corolla L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 142 (Engine Starting System (M20A-FKS) - Service Information) >> Engine Switch >> Removal [06/2018 - ] >> Procedure

Removal [06/2018 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL 

    Refer to PROCEDURE - Step 3 [06/2018 - 01/2019] , or refer to PROCEDURE - Step 3 [01/2019 - 09/2022] , or refer to PROCEDURE - Step 3 [09/2022 - 11/2022] , or refer to PROCEDURE - Step 3 [11/2022 - ]

  2. REMOVE ENGINE SWITCH 
    1. Disengage the 2 claws.
      GTY911133Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the engine switch connector to remove the engine switch.
      GTY911132Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals