Caution / Notice / Hint

WARNING: This page is about a different variant/trim than selected.

NOTE:

The lighting system (for HV Model) uses the CAN communication system. Inspect the communication functions by following How to Proceed with Troubleshooting. Troubleshoot the automatic high beam system after confirming that the communication systems are functioning properly.
Refer to HOW TO PROCEED WITH TROUBLESHOOTING [01/2019 - 09/2022]
Before replacing the main body ECU (multiplex network body ECU), refer to Registration.
Refer to REGISTRATION [01/2019 - 04/2020] , or refer to REGISTRATION [04/2020 - 09/2022]

HINT:

If the forward recognition camera stores a DTC for a malfunction of any of the following, this DTC will be stored simultaneously.