DTC P0105-2A: Manifold Absolute Pressure / Barometric Pressure Sensor Signal Stuck in Range [03/2019 - ]: Description
WARNING: This page is about a different variant/trim than selected.
Refer to DTC P0105-11.
Refer to DESCRIPTION [03/2019 - 03/2023] , or refer to DESCRIPTION [03/2023 - 09/2024] , or refer to DESCRIPTION [09/2024 - ]
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Memory | Note |
|---|---|---|---|---|---|---|
| P0105-2A | Manifold Absolute Pressure / Barometric Pressure Sensor Signal Stuck in Range | Intake manifold pressure measured after engine start drops by less than 2 kPa [0.3 psi] compared to the intake manifold pressure (atmospheric pressure) measured before engine start (2 trip detection logic). |
|
Comes on | DTC stored |
|