LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Corolla L >> Repair and Diagnosis >> External Pages >> Different car >> Section 392 (Acoustic Vehicle Alerting System - Service Information) >> Vehicle Approaching Speaker >> Inspection [09/2022 - ] >> Procedure

Inspection [09/2022 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2025 Toyota GR Corolla, 2025 Toyota Corolla, 2024 Toyota GR Corolla, 2024 Toyota Corolla, and 2023 Toyota GR Corolla. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT VEHICLE APPROACHING SPEAKER ASSEMBLY 
    1. GTY849926Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Vehicle Approaching Speaker Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection Condition Specified Condition
      1 - 2 Always 3.2 to 4.8 Ω

      HINT: 

      Make sure that there are no problems such as looseness or play with the installation of the vehicle approaching speaker assembly. If the result is not as specified, replace the vehicle approaching speaker assembly.