LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Corolla L >> Repair and Diagnosis >> External Pages >> Different car >> Section 361 (Hybrid Control System (Li-Ion W/ Pa10) - Diagnostic Codes (3 Of 3) & Circuit Tests) >> HYBRID CONTROL SYSTEM (for LITHIUM-ION BATTERY with PA10) >> Pattern Select Switch EV Mode Circuit [09/2022 - ] >> Description

Pattern Select Switch EV Mode Circuit [09/2022 - ]: Description

WARNING: This page is about a different car, the 2025 Toyota Corolla, 2024 Toyota Corolla, and 2023 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.

The EV mode switch signal will be sent to the hybrid vehicle control ECU when the EV mode switch is operated. If the specified conditions are met, the system enters EV drive mode and the vehicle will be driven using EV drive mode. This signal is then transmitted from the hybrid vehicle control ECU via CAN to the combination meter assembly to illuminate the EV drive mode indicator.

scientia non olet · About LEMON Manuals