LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Corolla L >> Repair and Diagnosis >> External Pages >> Different car >> Section 316 (Hybrid Transaxle System (Pa10) - Service Information) >> Pattern Select Switch >> Removal [09/2022 - ] >> Procedure

Removal [09/2022 - ]: Procedure

WARNING: This page is about a different car, the 2025 Toyota Corolla, 2024 Toyota Corolla, and 2023 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY 

    See step  1

  2. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL 

    Refer to PROCEDURE - Step 3 [09/2022 - 11/2022] , or refer to PROCEDURE - Step 3 [11/2022 - ]

  3. REMOVE FRONT CONSOLE UPPER PANEL GARNISH 

    Refer to PROCEDURE - Step 5 [09/2022 - 11/2022] , or refer to PROCEDURE - Step 5 [11/2022 - ]

  4. REMOVE POSITION INDICATOR HOUSING ASSEMBLY 

    Refer to PROCEDURE - Step 10 [09/2022 - 11/2022] , or refer to PROCEDURE - Step 8 [11/2022 - ]

  5. REMOVE COMBINATION SWITCH ASSEMBLY 
    1. Disengage the 4 claws and remove the combination switch assembly from the position indicator housing assembly.
      GTY845548Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals