Diagnosis System [08/2023 - ]
WARNING: This page is about a different car, the 2025 Toyota GR Corolla, 2025 Toyota Corolla, 2024 Toyota GR Corolla, and 2024 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
- DESCRIPTION
- When troubleshooting a vehicle with a diagnosis system, the only difference from the usual troubleshooting procedure is connecting the GTS to the vehicle and reading various data output from the clearance warning ECU assembly.
The clearance warning ECU assembly stores DTCs when the ECU detects a malfunction in the ECU itself or in its circuits.
To check the DTCs, connect the GTS to the DLC3 on the vehicle. The GTS makes it possible to clear the DTCs, activate the various actuators, and check the freeze frame data and Data List.
- When troubleshooting a vehicle with a diagnosis system, the only difference from the usual troubleshooting procedure is connecting the GTS to the vehicle and reading various data output from the clearance warning ECU assembly.
- CHECK DLC3
- Check the DLC3.
Refer to GENERAL INFORMATION [06/2018 - ]
- Check the DLC3.