DTC B1500-13: Fuel Sender Circuit Open [01/2019 - 03/2019]: Description

This DTC is stored when the combination meter assembly detects a fuel sender gauge assembly malfunction via a direct line.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area
B1500-13	Fuel Sender Circuit Open	Diagnosis Condition: The ignition switch is ON IG power source voltage is 9.5 V or more Malfunction Status: Voltage signal from fuel sender gauge assembly is 0.2 V or less Voltage signal from fuel sender gauge assembly is 4.7 V or more Malfunction Time: 10 seconds or more	Harness or connector Fuel sender gauge assembly Fuel suction tube with pump and gauge assembly Combination meter assembly

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

B1500-13

Fuel Sender Circuit Open

Diagnosis Condition:

Malfunction Status:

Malfunction Time: