On-Vehicle Inspection [01/2019 - 09/2022]: Procedure
- WARNING LIGHT AND INDICATOR LIGHT INITIAL CHECK
- When the ignition switch is turned to ON, check that the ABS warning light, brake warning light / red (malfunction), slip indicator light and VSC OFF indicator light come on for approximately 3 seconds.
HINT:
If the warning lights and indicator lights does not illuminate or illuminates for more than approximately 3 seconds, perform troubleshooting for the electronically controlled brake system.
Refer to HOW TO PROCEED WITH TROUBLESHOOTING [01/2019 - 09/2022]
- When the ignition switch is turned to ON, check that the ABS warning light, brake warning light / red (malfunction), slip indicator light and VSC OFF indicator light come on for approximately 3 seconds.