LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Avalon Limited >> Repair and Diagnosis >> Steering >> Steering Column >> Steering Column (Service Information) >> Steering Pad Switch >> Installation [04/2018 -] >> Procedure

Installation [04/2018 -]: Procedure

  1. INSTALL STEERING PAD SWITCH ASSEMBLY 
    1. Engage the 4 claws and 3 pins to install the steering pad switch assembly.
    2. Install the 2 screws.
    3. Connect the steering pad switch connector to the spiral cable with sensor sub-assembly.
  2. INSTALL HORN BUTTON ASSEMBLY 

    Refer to INSTALLATION [04/2018 - 08/2020] , or refer to INSTALLATION [08/2020 -]

scientia non olet · About LEMON Manuals