Pattern Select Switch EV Mode Circuit [04/2018 - 08/2020]: Caution/Notice/Hint

Depending on the condition of the hybrid control system and the driving conditions, the drive mode may not be able to be changed to EV drive mode and a warning message will be displayed on the multi-information display.

HINT: 

Under the following conditions, the drive mode will not be able to be changed to EV drive mode:

• The hybrid control system is extremely hot.
• The hybrid control system is extremely cold.
• The engine is warming up.
• The SOC (State of Charge) of the HV battery is low.
• The vehicle is being driven at a speed higher than the specified value.
• The accelerator pedal is being fully depressed or the vehicle is climbing a slope.
• The defroster is on.
• DTCs are stored.