Security Indicator Light Does not Blink [04/2018 -]: Description

WARNING: This page is about a different variant/trim than selected.

The certification ECU (smart key ECU assembly) blinks the security indicator light (radio and display receiver assembly) when the immobiliser is set (power switch off).
The certification ECU (smart key ECU assembly) receives the security indicator light signal from the main body ECU (multiplex network body ECU) via CAN communication when the theft deterrent system is in the arming preparation state or alarm sounding state. Then, the certification ECU (smart key ECU assembly) blinks the security indicator light (radio and display receiver assembly).