Message Not Displayed on Multi-information Display When AUTO Function Set to ON/OFF [08/2021 -]: Procedure
WARNING: This page is about a different variant/trim than selected.
- CHECK OPERATION OF AUTO FUNCTION
- Check that the AUTO function operates when the operating conditions are met.
HINT:
Do not use the combination meter assembly to determine whether the AUTO function is operating or not.
Result
Result Proceed to The AUTO function operates A The AUTO function does not operate B
Result:
A
REPLACE COMBINATION METER ASSEMBLY. Refer to REMOVAL [08/2021 -]
Result:
B
GO TO Electric Parking Brake System AUTO Function Circuit. Refer to Electric Parking Brake System AUTO Function Circuit [08/2021 -]
- Check that the AUTO function operates when the operating conditions are met.