DTC C2A63: Back Camera Internal Circuit [04/2018 - ]: Procedure
WARNING: This page is about a different variant/trim than selected.
- CHECK FOR DTC
- Clear the DTCs.
Chassis > Panoramic View Monitor > Clear DTCs
- Check for DTCs.
Chassis > Panoramic View Monitor > Trouble Codes
OK
DTC C2A63 is not output.
Result
Proceed to OK NG
Result:
OK
END
Result:
NG
REPLACE TELEVISION CAMERA ASSEMBLY. Refer to REMOVAL [04/2018 - ]
- Clear the DTCs.