DTC B1650: Occupant Classification System Malfunction; DTC B165A: Occupant Detection Sensor Zero Point Calibration Incomplete [04/2018 -]: Procedure
WARNING: This page is about a different variant/trim than selected.
- CHECK DTC (OCCUPANT CLASSIFICATION SYSTEM)
- Check for occupant classification system DTCs.
Refer to DTC CHECK / CLEAR [04/2018 -]
OK
DTCs are not output.
Result
Proceed to OK NG
Result:
NG
GO TO OCCUPANT CLASSIFICATION SYSTEM. Refer to DIAGNOSTIC TROUBLE CODE CHART [04/2018 -]
Result:
OK
See step 2
- Check for occupant classification system DTCs.
- CLEAR DTC (AIRBAG SYSTEM)
- Turn the power switch on (IG), and wait for at least 60 seconds.
- Clear the DTCs stored in memory.
Body Electrical > SRS Airbag > Clear DTCs
Result
Proceed to NEXT
Result:
NEXT
END