DTC B163B: Side Airbag Sensor Assembly No. 2 Lost Communication (LH); DTC B163C: Side Airbag Sensor Assembly No. 2 Initialization Error (LH) [04/2018 -]: Description

WARNING: This page is about a different variant/trim than selected.

The side collision sensor LH circuit (bus 2) consists of the airbag ECU assembly and side No. 1 airbag sensor LH.

The side No. 1 airbag sensor LH detects impacts to the vehicle and sends signals to the airbag ECU assembly to determine if the airbags and pretensioners should be deployed.

These DTCs are stored when a malfunction is detected in the side collision sensor LH circuit (bus 2).

DTC No.	Detection Item	DTC Detection Condition	Trouble Area	Warning Indicate	Test Mode / Check Mode
B163B	Side Airbag Sensor Assembly No. 2 Lost Communication (LH)	The airbag ECU assembly detects a line short, short to ground or B+, or an open in the side collision sensor LH circuit (bus 2). Side No. 1 airbag sensor LH malfunction Airbag ECU assembly malfunction	Floor wire Side No. 1 airbag sensor LH Airbag ECU assembly	Comes on	Does not apply to test/check mode
B163C	Side Airbag Sensor Assembly No. 2 Initialization Error (LH)	The airbag ECU assembly detects a line short, short to ground or B+, or an open in the side collision sensor LH circuit (bus 2). Side No. 1 airbag sensor LH malfunction Airbag ECU assembly malfunction	Floor wire Side No. 1 airbag sensor LH Airbag ECU assembly	Comes on	Does not apply to test/check mode