DTC B162A: Side Airbag Sensor Assembly No. 2 (RH) [04/2018 -]: Description
WARNING: This page is about a different variant/trim than selected.
The side collision sensor RH circuit (bus 2) consists of the airbag ECU assembly and side No. 1 airbag sensor RH.
The side No. 1 airbag sensor RH detects impacts to the vehicle and sends signals to the airbag ECU assembly to determine if the airbags and pretensioners should be deployed.
DTC B162A is stored when a malfunction is detected in the side No. 1 airbag sensor RH.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Warning Indicate | Test Mode / Check Mode |
|---|---|---|---|---|---|
| B162A | Side Airbag Sensor Assembly No. 2 (RH) |
|
|
Comes on | Does not apply to test/check mode |