Installation [04/2018 -]: Procedure

WARNING: This page is about a different variant/trim than selected.

INSTALL PCV VALVE (VENTILATION VALVE SUB-ASSEMBLY)
1. Apply a light coat of engine oil to the O-ring.
  NOTE:
  When reusing the PCV valve (ventilation valve sub-assembly), inspect the O-ring.
2. Install the PCV valve (ventilation valve sub-assembly) to the cylinder head sub-assembly.
INSTALL INTAKE MANIFOLD
Refer to INSTALLATION [04/2018 - 08/2021] , or refer to INSTALLATION [08/2021 -]