Caution / Notice / Hint
WARNING: This page is about a different variant/trim than selected.
NOTE:
- Inspect the fuses for circuits related to this system before performing the following procedure.
- First, check for smart key system (for Start Function) DTCs, and after confirming that there is no malfunction, proceed with troubleshooting.
Refer to DTC CHECK / CLEAR [04/2018 - ]
- Before replacing the main body ECU (multiplex network body ECU), refer to Registration.
Refer to REGISTRATION [04/2018 - 08/2020] , or refer to REGISTRATION [08/2020 - ]