DTC C2198: Initialization Switch Error (for Test Diagnosis) [04/2018 -]: Description
WARNING: This page is about a different variant/trim than selected.
The switch circuit inside the combination meter assembly turns on and off according to the steering pad switch assembly operation.
During test mode, the tire pressure warning light blinks at 0.125 second intervals when "Set Pressure" is selected on the multi-information display, and illuminates when the "OK" switch (steering pad switch assembly) is pressed.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Note |
|---|---|---|---|---|
| C2198 | Initialization Switch Error (for Test Diagnosis) | Test mode procedure is performed. |
|
- |