DTC C2176: Receiver Error [04/2018 -]: Procedure

WARNING: This page is about a different variant/trim than selected.

CHECK DTC OUTPUT (C2176)

Clear the DTCs.
Chassis > Tire Pressure Monitor > Clear DTCs
Turn the power switch off.

Turn the power switch on (IG) and check for DTCs.

Chassis > Tire Pressure Monitor > Trouble Codes

Result

Result	Proceed to
C2176 is not output	A
C2176 is output	B

Result:

A

END

Result:

B

REPLACE TIRE PRESSURE WARNING ECU AND RECEIVER. Refer to REMOVAL [04/2018 - 08/2021] , or refer to REMOVAL [08/2021 -]