Caution / Notice / Hint

WARNING: This page is about a different variant/trim than selected.

NOTE:

When a power window regulator motor assembly is replaced or removed and reinstalled, it is necessary to perform initialization.
Refer to INITIALIZATION [04/2018 - ]
When the sliding roof ECU (sliding roof drive gear assembly) is replaced or removed and reinstalled, it is necessary to perform initialization.*
Refer to INITIALIZATION [04/2018 - ]
1. *: w/ Sliding Roof System
Before replacing the main body ECU (multiplex network body ECU), refer to Registration.
Refer to REGISTRATION [04/2018 - 08/2020] , or refer to REGISTRATION [08/2020 - ]