DTC C14D5: Accumulator Pressure Sensor Stuck [04/2018 - ]: Procedure
WARNING: This page is about a different variant/trim than selected.
- CHECK DTC
- Clear the DTCs.
Refer to DTC CHECK / CLEAR [04/2018 - ]
Chassis > ABS/VSC/TRAC > Clear DTCs
- Turn the power switch off.
- Turn the power switch on (IG).
- Depress the brake pedal 10 times or more to operate the pump motor.
- After the pump motor stops, check for DTCs.
Refer to DTC CHECK / CLEAR [04/2018 - ]
Chassis > ABS/VSC/TRAC > Trouble Codes
Result
Result Proceed to DTC C14D5 is not output. A DTC C14D5 is output. B
Result:
A
USE SIMULATION METHOD TO CHECK. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [04/2018 - ]
Result:
B
REPLACE BRAKE BOOSTER WITH MASTER CYLINDER ASSEMBLY. Refer to REMOVAL [04/2018 - 08/2021] , or refer to REMOVAL [08/2021 - ]
- Clear the DTCs.