DTC C14C3: Servo Pressure Sensor Zero Point Malfunction [04/2018 - ]: Description
WARNING: This page is about a different variant/trim than selected.
The Servo pressure sensor detects and outputs the brake fluid pressure generated in the wheel cylinder according to the vehicle condition to the skid control ECU (brake booster with master cylinder assembly).
| DTC No. | Detection Item | INF Code | DTC Detection Condition | Trouble Area | MIL | Note |
|---|---|---|---|---|---|---|
| C14C3 | Servo Pressure Sensor Zero Point Malfunction | 424 | When the brake pedal is not depressed, the servo pressure sensor output value is -0.63 MPa (-6.4 kgf/cm2 , -91.4 psi) or less or 1.53 MPa (15.6 kgf/cm2 , 222 psi) or more for 3 seconds or more. | Skid control ECU (brake booster with master cylinder assembly) | Comes on |
|