DTC C14B3: Reaction Force Pressure Sensor Zero Point Malfunction [04/2018 - ]: Description
WARNING: This page is about a different variant/trim than selected.
The reaction force pressure sensor detects and outputs the brake fluid pressure of the stroke simulator, which changes in accordance with brake pedal operation, to the skid control ECU (brake booster with master cylinder assembly).
| DTC No. | Detection Item | INF Code | DTC Detection Condition | Trouble Area | MIL | Note |
|---|---|---|---|---|---|---|
| C14B3 | Reaction Force Pressure Sensor Zero Point Malfunction | 204 | When the brake pedal is not depressed, the reaction force pressure sensor output value is -0.63 MPa (-6.4 kgf/cm2 , -91.4 psi) or less or 1.53 MPa (15.6 kgf/cm2 , 222 psi) or more for 3 seconds or more. | Skid control ECU (brake booster with master cylinder assembly) | Comes on |
|