DTC C1440: Steering Angle Sensor Unusual Bank Angle Detected [04/2018 - ]: Description
WARNING: This page is about a different variant/trim than selected.
If the skid control ECU (brake booster with master cylinder assembly) determines that the vehicle is being driven at a steep bank angle, the skid control ECU (brake booster with master cylinder assembly) stores DTC C1440 while VSC operation is temporarily disabled.
This is not a malfunction if the system and sensor circuits are normal and normal VSC operation resumes.
| DTC No. | Detection Item | INF Code | DTC Detection Condition | Trouble Area | MIL | Note |
|---|---|---|---|---|---|---|
| C1440 | Steering Angle Sensor Unusual Bank Angle Detected | 1157 | Driving at a steep bank angle. | Yaw rate sensor (airbag ECU assembly) | Does not come on | VSC DTC |