Inspection [08/2020 - ]: Procedure
WARNING: This page is about a different car, the 2021 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT FLOW SHUTTING VALVE (NO. 1 WATER BY-PASS HOSE)
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
| Tester Connection |
Condition |
Specified Condition |
| 1 - 2 |
20°C (68°F) |
22 to 28 Ω |
If the result is not as specified, replace the flow shutting valve (No. 1 water by-pass hose).