Installation [08/2020 - ]: Procedure
WARNING: This page is about a different car, the 2021 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL TIMING CHAIN COVER OIL SEAL
- Apply MP grease to the lip of a new timing chain cover oil seal.NOTE:
- Keep the lip free from foreign matter.
- Do not allow MP grease to contact the dust seal.
- Using SST and a hammer, tap in the timing chain cover oil seal.
- SST: 09223-00010
*a 0 to 2 mm Standard Depth
0 to 2 mm (0 to 0.0787 in.) (From the edge of the No. 2 timing chain cover assembly)
NOTE:Do not tap in the timing chain cover oil seal at an angle.
- Apply MP grease to the lip of a new timing chain cover oil seal.
- INSTALL CRANKSHAFT PULLEY ASSEMBLY
See step 49
- INSTALL V-RIBBED BELT
Refer to PROCEDURE - Step 1
- INSTALL ENGINE ASSEMBLY WITH TRANSAXLE
Refer to INSTALLATION [08/2020 - ]