Reassembly [08/2020 - ]: Procedure

WARNING: This page is about a different car, the 2021 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL LOWER POSITION INDICATOR HOUSING

Engage the 4 claws and 2 guides to install the lower position indicator housing to the shift lock control unit assembly.

GTY754917

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

NOTE:

Do not damage the lower position indicator housing.

INSTALL INDICATOR LIGHT WIRE SUB-ASSEMBLY

Install each terminal to the connector housing as shown in the illustration.

GTY863824

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*1	Connector Housing
*a	Rear view of wire harness connector
	Shift Position Indicator Terminal

Lock the secondary lock.

GTY869099

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Engage the claw to install the clamp to the indicator light wire sub-assembly.

GTY886307

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Connect the indicator light wire sub-assembly connector.

GTY944204

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*a	Guide
*b	Clamp

Engage the clamp and guide to install the indicator light wire sub-assembly to the shift position indicator.

INSTALL SHIFT POSITION INDICATOR

Engage the 2 claws to install the shift position indicator to the rear upper console panel sub-assembly.

GTY937972

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Install the 2 screws.

GTY891767

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Engage the 2 clamps to connect the wire harness.

GTY937973

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002