Installation [08/2020 - ]: Procedure
WARNING: This page is about a different car, the 2021 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL CAMSHAFT TIMING VALVE ASSEMBLY
- Apply a light coat of engine oil to the O-ring of the camshaft timing valve assembly.NOTE:
If reusing the camshaft timing valve assembly, be sure to inspect the O-ring.
- Temporarily install the camshaft timing valve assembly to the camshaft timing exhaust gear assembly.NOTE:
If the camshaft timing valve assembly has been struck or dropped, replace it.
- Using a 5 mm hexagon socket wrench, install the camshaft timing valve assembly with the bolt.
Torque: 19 N*m (194 kgf*cm, 14 ft.*lbf)
- Apply a light coat of engine oil to the O-ring of the camshaft timing valve assembly.
- INSTALL CAM TIMING OIL CONTROL SOLENOID ASSEMBLY
Refer to INSTALLATION [08/2020 - ]