Removal [08/2020 - ]: Procedure

WARNING: This page is about a different car, the 2021 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE VACUUM SWITCHING VALVE (for Active Control Engine Mount System)
Refer to REMOVAL [08/2020 - ]
REMOVE FRONT WHEEL OPENING EXTENSION PAD LH
Refer to PROCEDURE - Step 8
REMOVE FRONT WHEEL OPENING EXTENSION PAD RH
Refer to PROCEDURE - Step 9
REMOVE NO. 1 ENGINE UNDER COVER
Refer to PROCEDURE - Step 10
REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY
Refer to PROCEDURE - Step 11

REMOVE FRONT ENGINE MOUNTING INSULATOR

Disengage the 4 clamps to separate the radiator hose, vacuum hoses and No. 2 engine wire from the No. 1 radiator bracket.

GTY948629

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Remove the bolt and No. 1 radiator bracket from the front engine mounting bracket.

GTY948406

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Disengage the 2 clamps to separate the vacuum hoses from the front engine mounting insulator.

GTY948637

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Remove the vacuum hose from the front engine mounting insulator.

GTY948740

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Support the engine assembly with transaxle using a jack and wooden block.

GTY948724

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Wooden Block Placement Location

Remove the 4 bolts and front engine mounting bracket.

GTY948738

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Remove the 3 nuts and front engine mounting insulator from the front frame assembly.

GTY754280

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Remove the nut and stay from the front engine mounting insulator.

GTY948335

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002