Monitor Result
WARNING: This page is about a different car, the 2021 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
Refer to detailed information in Checking Monitor Status.
Refer to CHECKING MONITOR STATUS [08/2020 - ]
P0456: EVAPORATIVE SYSTEM / SMALL LEAK
| Monitor ID | Test ID | Scaling | Unit | Description |
|---|---|---|---|---|
| $3D | $C9 | Multiply by 0.001 | kPa | Test value for small leak (P0456) |
P0455: EVAPORATIVE SYSTEM / GROSS LEAK
| Monitor ID | Test ID | Scaling | Unit | Description |
|---|---|---|---|---|
| $3D | $CA | Multiply by 0.001 | kPa | Test value for gross leak (P0455) |
P2401: EVAPORATIVE SYSTEM / VACUUM PMP OFF
| Monitor ID | Test ID | Scaling | Unit | Description |
|---|---|---|---|---|
| $3D | $CB | Multiply by 0.001 | kPa | Test value for leak detection pump stuck off (P2401) |
P2402: EVAPORATIVE SYSTEM / VACUUM PMP ON
| Monitor ID | Test ID | Scaling | Unit | Description |
|---|---|---|---|---|
| $3D | $CD | Multiply by 0.001 | kPa | Test value for leak detection pump stuck on (P2402) |
P2420: EVAPORATIVE SYSTEM / VENT VALVE OFF
| Monitor ID | Test ID | Scaling | Unit | Description |
|---|---|---|---|---|
| $3D | $CE | Multiply by 0.001 | kPa | Test value for vent valve stuck off (P2420) |
P2419: EVAPORATIVE SYSTEM / VENT VALVE ON
| Monitor ID | Test ID | Scaling | Unit | Description |
|---|---|---|---|---|
| $3D | $CF | Multiply by 0.001 | kPa | Test value for vent valve stuck on (P2419) |
P043E: EVAPORATIVE SYSTEM / ORIFICE CLOGGED
| Monitor ID | Test ID | Scaling | Unit | Description |
|---|---|---|---|---|
| $3D | $D0 | Multiply by 0.001 | kPa | Test value for reference orifice low flow (P043E) |
P043F: EVAPORATIVE SYSTEM / ORIFICE HI-FLW
| Monitor ID | Test ID | Scaling | Unit | Description |
|---|---|---|---|---|
| $3D | $D1 | Multiply by 0.001 | kPa | Test value for reference orifice high flow (P043F) |
P0441: EVAPORATIVE SYSTEM / PURGE VSV CLOSED
| Monitor ID | Test ID | Scaling | Unit | Description |
|---|---|---|---|---|
| $3D | $D4 | Multiply by 0.001 | kPa | Test value for purge VSV stuck closed (P0441) |
P0441: EVAPORATIVE SYSTEM / PURGE VSV OPENED
| Monitor ID | Test ID | Scaling | Unit | Description |
|---|---|---|---|---|
| $3D | $D5 | Multiply by 0.001 | kPa | Test value for purge VSV stuck open (P0441) |
P0441: EVAPORATIVE SYSTEM / PURGE FLOW
| Monitor ID | Test ID | Scaling | Unit | Description |
|---|---|---|---|---|
| $3D | $D7 | Multiply by 0.001 | kPa | Test value for purge flow insufficient (P0441) |